初次提交

src/lang/device/en.js

@@ -0,0 +1,112 @@
+export default {
+  pcs: {
+    runState: 'Run state',
+    rsState: 'Distance/Local State',
+    local: 'Local',
+    distance: 'Distance',
+    gridMode: 'And in off-grid mode',
+    grid: 'Grid',
+    offGrid: 'Off-grid',
+    deviceState: 'Device state',
+    standby: 'Standby',
+    fault: 'Fault',
+    charge: 'Charge',
+    discharge: 'Discharge',
+    acbreaker: 'AC Breaker',
+    dcbreaker: 'DC Breaker',
+    shutdown: 'Shutdown',
+    run: 'Run',
+    faultSign: 'Fault signal',
+    eqptList: 'Eqpt List',
+    pcstopo: 'PCS Topology',
+    totalAcRe: 'Total Active Power/ Total Reactive Power',
+    totalActivePower: 'Total Active Power',
+    totalReactivePower: 'Total Reactive Power',
+    timeGranula: 'Time granularity',
+    noData: 'No data',
+    min: 'Minutes',
+    filter: 'Input keyword to filter',
+    runData: 'Run data',
+    avgVol: 'Average voltage',
+    avgTem: 'Average temperature',
+    maxvolDiff: 'Maximum voltage difference',
+    maxCellVol: 'Maximum cell voltage',
+    batteryGroupNum: 'Battery number',
+    cellPostion: 'Cell position',
+    maxTemDiff: 'Maximum temperature difference',
+    maxCellTem: 'Maximum cell temperature',
+    minCellTem: 'Minimum cell temperature',
+    minCellVol: 'Minimum cell voltage',
+    batteryCluster: 'Battery Cluster Topology',
+    clusterTotalVol: 'Cluster Total Voltage/SOC',
+    vol: 'Voltage',
+    batteryGroupTopo: 'Battery Group Topology',
+    cellVolChart: 'Cell voltage histogram',
+    volRatio: 'Voltage size distribution ratio',
+    cellTemChart: 'Cell Temperature histogram',
+    unit: 'Unit',
+    tem: 'Temperature',
+    volUnit: 'Voltage/Number',
+    temUnit: 'Temperature/Number',
+    maxVol: 'Maximum voltage',
+    minVol: 'Minimum voltage',
+    maxTem: 'Maximum temperature',
+    minTem: 'Minimum temperature',
+    emu: 'EMU',
+    online: 'Online',
+    offline: 'Offline',
+    on: 'On',
+    off: 'Off',
+    temConCab: 'Temperature Control Cabinet',
+    dehumidifier: 'Dehumidifier',
+    ammeter: 'Ammeter',
+    alarm: 'Alarm',
+    fire: 'Fire',
+    liquidCooltopo: 'Liquid Cooling Topology',
+    liquidCoolTem: 'Liquid Cooling Temperature',
+    startTime: 'Start Time',
+    endTime: 'End Time',
+    volqua: 'Voltage quality',
+    avol: 'A phase voltage',
+    bvol: 'B phase voltage',
+    cvol: 'C phase voltage',
+    curqua: 'Current quality',
+    curret: 'Current',
+    acur: 'A phase current',
+    bcur: 'B phase current',
+    ccur: 'C phase current',
+    acRea: 'Active/Reactive',
+    active: 'Active',
+    reactive: 'Reactive',
+
+    eqptRunState: 'Eqpt Run State',
+    cumCharge: 'Cumulative charge',
+    cumDischarge: 'Cumulative discharge',
+    annualCharge: 'Annual charge',
+    annualDischarge: 'Annual discharge',
+    monthCharge: 'Monthly charge',
+    monthDischarge: 'Monthly discharge',
+    dayCharge: 'Daily charge',
+    dayDischarge: 'Daily discharge',
+    realPower: 'Real-time power',
+    chagreDisPower: 'Charge and discharge data',
+    chargeCap: 'Charge capacity',
+    disChargeCap: 'Discharge capacity',
+    energyStorageUnitTopo: 'Energy storage unit topology',
+    powerCurve: 'Power curve',
+    power: 'Power',
+    temVol: 'Temperature and voltage distribution',
+    auxPower: 'Auxiliary power',
+    temHum: 'Temperature and humidity',
+    hum: 'Humidity',
+    leftHum: 'Left Humidity',
+    rightHum: 'Right Humidity',
+    leftTem: 'Left Temperature',
+    rightTem: 'Right Temperature',
+
+    dataDisplay: 'Data Display',
+
+    airTopo: 'Air Conditioning Topology',
+    airTem: 'Air Conditioning Temperature'
+  }
+}

src/lang/device/zh.js

@@ -0,0 +1,112 @@
+export default {
+  pcs: {
+    runState: '运行状态',
+    rsState: '远方/就地状态',
+    local: '就地',
+    distance: '远方',
+    gridMode: '并离网状态',
+    grid: '并网',
+    offGrid: '离网',
+    deviceState: '设备状态',
+    standby: '待机',
+    fault: '故障',
+    charge: '充电',
+    discharge: '放电',
+    acbreaker: '交流断路器',
+    dcbreaker: '直流断路器',
+    shutdown: '停机',
+    run: '运行',
+    faultSign: '故障信号',
+    eqptList: '设备列表',
+    pcstopo: 'PCS拓扑',
+    totalAcRe: '总有功/总无功功率',
+    totalActivePower: '总有功功率',
+    totalReactivePower: '总无功功率',
+    timeGranula: '时间粒度',
+    noData: '暂无数据',
+    min: '分钟',
+    filter: '请输入关键字进行过滤',
+    runData: '运行数据',
+    avgVol: '平均电压',
+    avgTem: '平均温度',
+    maxvolDiff: '最大电压差',
+    maxCellVol: '单体最高电压',
+    batteryGroupNum: '电池组号',
+    cellPostion: '电芯位置',
+    maxTemDiff: '最大温度差',
+    maxCellTem: '单体最高温度',
+    minCellTem: '单体最低温度',
+    minCellVol: '单体最低电压',
+    batteryClusterTopo: '电池簇拓扑图',
+    clusterTotalVol: '簇总压/SOC',
+    vol: '电压',
+    batteryGroupTopo: '电池组拓扑图',
+    cellVolChart: '单体电压柱状图',
+    volRatio: '电压大小分布比例',
+    cellTemChart: '单体温度柱状图',
+    unit: '单位',
+    tem: '温度',
+    volUnit: '电压/个',
+    temUnit: '温度/个',
+    maxVol: '最高电压',
+    minVol: '最低电压',
+    maxTem: '最高温度',
+    minTem: '最低温度',
+    emu: '并网柜',
+    online: '在线',
+    offline: '离线',
+    on: '合位',
+    off: '分位',
+    temConCab: '温控箱',
+    dehumidifier: '除湿仪',
+    ammeter: '电表',
+    alarm: '报警',
+    fire: '火警',
+    liquidCooltopo: '液冷拓扑图',
+    liquidCoolTem: '液冷温度',
+    startTime: '开始时间',
+    endTime: '结束时间',
+    volqua: '电压质量',
+    avol: 'A相电压',
+    bvol: 'B相电压',
+    cvol: 'C相电压',
+    curqua: '电流质量',
+    curret: '电流',
+    acur: 'A相电流',
+    bcur: 'B相电流',
+    ccur: 'C相电流',
+    acRea: '有功/无功',
+    active: '有功功率',
+    reactive: '无功功率',
+    batteryCluster: '电池簇',
+    eqptRunState: '设备运行状态',
+    cumCharge: '累计充电量',
+    cumDischarge: '累计放电量',
+    annualCharge: '年充电量',
+    annualDischarge: '年放电量',
+    monthCharge: '月充电量',
+    monthDischarge: '月放电量',
+    dayCharge: '日充电量',
+    dayDischarge: '日放电量',
+    realPower: '实时功率',
+    chagreDisPower: '充放电数据',
+    chargeCap: '充电量',
+    disChargeCap: '放电量',
+    energyStorageUnitTopo: '储能单元拓扑图',
+    powerCurve: '功率曲线',
+    power: '功率',
+    temVol: '温度电压分布',
+    auxPower: '辅控功率',
+    temHum: '温/湿度',
+    hum: '湿度',
+    leftHum: '左侧湿度',
+    rightHum: '右侧湿度',
+    leftTem: '左侧温度',
+    rightTem: '右侧温度',
+
+    dataDisplay: '数据展示',
+
+    airTopo: '空调拓扑图',
+    airTem: '空调温度'
+  }
+}